Clock

SKU: 754

Pendulum Bobs

Threaded at the bottom with a rating nut for easy timing of the clock.

Pendulum Brass for Sessions Clock

SKU: 757

Pendulum Rods for American Clock

(Packet of 100 pcs) Cut to the length you need; great for 8 day and 1 day (30 hour) clock movements, Set Thomas Sessions antique clocks and replica clocks.

Pivot Brass Bushing for Clock

SKU: 563

Assortment packet of 100 pcs. Bushings are needed when pivot holes become out of shape.

Pivot Locator 6¼”

SKU: 290

Useful in assembling clock movements to guide pivots into holes without damage.

Pocket Watch Key Set of 14

SKU: 750

Nos. 00 to 12 with key chain; Size: 1½”. Winding and setting keys for key wind pocket watches.

Pocket Watch Key Set of 20 in Wood Box

SKU: 750A

Nos. 1 to 10, each 2 pcs.

Punch Box Clockmaker

SKU: 292

16 punches and riveting round anvil with 10 graduated holes. Punches: 4 flat faced hollow, 10 round faced hollow and 2 hole closing.

Quartz Clock Nut Opener

SKU: 3031

With specially suited jaws for easy opening

Ratchet Clicks for Clocks

SKU: 1444

High grade steel to place tension on ratchet clicks, thereby creating power. Will ensure clock will wind in one direction.

Ratchet Clicks with Wire

SKU: 565

•For American 8 day time and strike movements; attaches to main wheel. •Left and Right •Packet of 6 pcs with rivets

Silk Pendulum

SKU: 1907

With rating slider for French silk type suspension. Total length 24cm; Bob Ø = 28mm

Solid Brass Key – Four Pronged

SKU: 1849

Nos. 8, 10, 12, 14 (4.25, 4.75, 5.25, 5.75mm)

Solid Brass Wire 11

SKU: 1894

Set of 10 Sizes: 0.50, 0.80, 1.20, 1.50,2.30, 3.20, 4.00, 4.80, 6.50and 9.50mm

Spider Key Set of 3 – Five Pronged

SKU: 2078

New antique colour tone. Nos.: 2, 4, 6, 8, 10; Nos.: 3, 5, 7, 9, 11; Nos.: 4, 6, 8, 10, 12

Split Stake

Length: 2⅞”; Width: 1”, Thickness: ½” A must for every clock maker. 9 holes ranging from 1.5mm to 6mm. Ideally used for working on wheels and protecting soft clock parts.

Stabilizers with Brass Button for Wall Clocks, Medium

SKU: 573

Plate: 1 9/16” long; Screw: 1” long.

Stabilizers with Small Centre Threading for Wall Clocks

SKU: 572

Plate: 1⁹/16” long; Screw: ⅞” long. Used to level clock movements to stabilise on wall surface.

Stainless Steel Suspension Spring Set of 10

Suspension Spring for Fuji Clock

SKU: 762

Length: 1½” (38mm).

Suspension Springs for Fusee Clocks

SKU: 1294

Size: 36mm x 5mm.

Synthetic Cord for Clocks 21 Feet

SKU: 1970

(Natural Colour)

Taper Pins 1” (25mm) for Clock

SKU: 516

Brass and Steel; Assorted packet of 100 pcs. To hold minute hands on antique style clocks, dial mounts various sizes and lengths.

Taper Pins Small

Packet of 500 pcs. Dia. (mm): 0.5 to 1.50; Length: 5 to 12.

Washers Count Wheel

SKU: 575

Packet of 100 pcs. For American wall clocks time and strike movements

Washers Flat with Round Holes

Assorted Packet of 100 pcs.

Washers Oxidised Black with Square and Round Holes

SKU: 1372

Winder for Loop End Mainspring

SKU: 547

Used in conjunction with “C” clamp set.

Wood Pegs 3” for English Dial Clocks

SKU: 1347

Assembly Supports for Clock Movements Set of 15

SKU: 1653

Props up the movement during repair.

Assortment packet of 12 pcs. Can be used for a wide variety of things like rivets, pivots, bushings, hinges, etc.Blue Pivot Steel Wires can also be provided in individual sizes in packets of 100 pcs. Prices will be quoted on request.

Brass Bushing for Clock

SKU: 3043

(Packet of 10 pcs) A) 0.80 (2.10 x 2.20mm) D) 1.00 (3.30 x 3.40mm) B) 0.90 (2.50 x 2.60mm) E) 1.10 (3.70 x 3.80mm) C) 0.90 (2.90 x 3.00mm) F) 1.10 (4.10 x 4.20mm)

Brass Ornaments Pendulums in Grandfather clocks

SKU: 1066

Brass Tabs to Secure Glass in Bezel

SKU: 1975

Assortment Packet of 20 pcs.

Brass Washers

Packet of 100 pcs. Go on top of minute hands to maintain hands to maintain tension so that hands do not move (dome shape).

C Clip Washers

SKU: 3034

Circular Glass Cutter

SKU: 788

Click Spring for Clocks

SKU: 1783

Clock Hand Bushing Tools

Clock Movement MANTEL

SKU: 584

(#300) A 8-day hour and half-hour strike movement. Drop back mounted pendulum and gong hand shaft enable this movement to fit into a variety of cases. Length of pendulum from centre of shaft to tip is 5½”. Overall measurements of the movement come complete with 4” hands and pendulum ball.

D-Type Clock Hands Remover

SKU: 79

Removes stubborn hands and gears from 400 day clocks.

Gauge for Clock Keys

SKU: 174

Measurement with Nos. and MM. Complete with a range of 18 key sizes from # 000 to 18.

Heavy Duty Hangers for Quartz Clock Movements

SKU: 1733

Packet of 25.

Hex Nut Wrench

SKU: 1974

Thin aluminium wrench useful in opening nuts on ½” and 13/32”.

Jumping/Split Washers for Wall Clocks

SKU: 579

Packet of 100 pcs. Attach various parts to the movement.

Let Down Tool Set

SKU: 1652

•Mainspring let down tools are used to safely unwind your clock’s powerful mainspring, so that you may disassemble the movement for proper cleaning and lubrication without injuring yourself and causing extensive damage to the movement. •These tools are designed to fit over your clock’s key, and work for almost all keys currently on the market. •Durable plastic handle with chucks made from quality steel.

Mechanical Clock Parts Set of 15

SKU: 1538

Popular replacement parts for American mantle clock movements.