Jewellery

SKU: 380

(Powder Coated) Use with flat and spiral saw blades; throat depth 2½”. Zinc supports offer sturdiness and support.

Saw Frame Adjustable with 150mm Throat Depth

SKU: 383A

For cutting larger pieces and parts where smaller frames cannot be used. Used in jewellery, metal crafts and wood working.

Saw Frame Adjustable with Black Handle and Tension Screw

SKU: 378

Enables tight control for precision cutting. • Forged steel hardened frame and adjustable cantoned wood handle • Serrated clamp hold saw blades firmly.

Saw Frame Adjustable with Handle

SKU: 383

(Deluxe) Cuts up to 2½” deep; SS bow and contoured wood handle for comfort grip. Adjusts from 2½” to 5½” long.

Scissors Stainless Steel

Beading Tools

Well designed with comfort fit handles for effective cutting on soft wire and metal sheets.

Scrapper Scriber Set of 3, Double Ended

SKU: 1021

•1 black tool steel - straight and bent tips. •1 sharp straight point with closed end. •1 polished steel with centre grip - straight and bent tips.

Scratch Awl 4”

SKU: 1487

To mark centre as well as precise indents for saving scribing and chiselling.

Setter’s Helper

Bench Tools

Set of 2 tool that fits into a standard 3/32” shank bur. It ensures a standard cut every time you set gemstone in channel or prong.

Shaping and Forming Anvils Set of 4

SKU: 1831

•High quality steel with a wood base for allkinds of shaping and forming jobs. •FLAT ANVIL - 72mm Dia x 53mm Height •LOW DOME ANVIL - 72mm Dia x 59mm Height and Radius 111mm •MEDIUM DOME ANVIL - 72mm Dia x 67mm Height and Radius 54mm •HIGH DOME ANVIL - 72mm Dia x 70mm Height and Radius 36mm

Sharpener for Graver

SKU: 413

Place the graver in any of the two openings and roll over flat oil stone to sharpen. Measures 2⅛” x 1⅜”

Shelf for Engraving Blocks

SKU: 1809

Made from durable tool steel. Attached itself to the mounting plate to hold the engraving blocks in front of the bench.

Shellac

Plating Solution

SKU: 1342

Popularly used for setting jewels and stones. Simply heat the shellac and apply to theitem that needs to be temporarily held. Rates shown are a indication only, will vary seasonally.

Casting & Soldering Equipments

Soldering Picks

Designed to be sharp and pointed to help you move solder into place

Soldering Tweezer with Heat Resistant Fibre Grip

Tweezers

Soldering Tweezer with Heat Resistant Fibre Grip and Serrated Tips (Without Cross Lock)

Spoon Stake Set of 4 with Wooden Stand

SKU: 1910

Small :32mm x 23mm x 8mm Medium :39mm x 26mm x 11mm Large :50mm x 33mm x 11mm XL :65mm x 40mm x 13mm

Casting & Soldering Equipments

Square Melting Dish

Used to melt small quantities of metal using a torch, use a different dish for each alloy.

SS Hook Ultrasonic Stand

Cleaning Tools

SKU: 1729

Height: 6¾” standing; 6 hooks for hanging vertically.

SS Scissors Snipe Fine Stick

Beading Tools

SS Scissors Snipe 4.5" Fine Stick

Standard Degree Gauge

SKU: 179A

15mm Capacity; Graduations 1 to 10mm; Throat 20mm.

Standard Wire and Sheet Gauge

SKU: 176

Steel construction; will measure wire and sheet in standard and millimetre sizes.

Steel “U” Channel Block Plus Hammer Set

SKU: 2030

Swage Block with 6 Half Round Grooves and 90° V Groove for bending. Each hammer will match groove.

Steel Ruler 12”

Steel Ruler 12”

Steel Ruler 6” (150 mm)

SKU: 417

With CM conversion only837 With Clip

STELLA Jewellery/Watch Cleaning Plastic Jar

Cleaning Tools

SKU: 1648

Provided with a cleaning brush and dipping basket (empty - no solution provided).

Stella Pen Plater

Plating Solution

SKU: 1028

Ideal hand-held plating pen with high density tips and airtight cap. Excellent for Rhodium, Gold and Silver plating for more precision and controlled work on specific areas. Platinum wire and side clips are SS.

STELLA Range of Saw Frames with Unique Tension Screw

STELLA Range of Saw Frames with Unique Tension Screw• Forged steel hardened frame and adjustable cantoned wood handle • Serrated clamp hold saw blades firmly.

Stepped Mandrel Round with Tang

Mandrels for Gold

Stepped Mandrel Round with Tang Diameter: 2” - 2¼”; 2½” - 2¾”.

Stone Chuck Brass

Chucks & Drills

SKU: 420

With ¼” holes to fit onto taper shaft motors. Made for use with stones.

Diamond Tools & Supplies, Bench Tools

Stone Setting Beading Tools Set of 16 on Wood Stand

SKU: 1701

Provided with a chuck; sizes # 1 to 16; high quality.1701.01 Wood Beading Tool Handle Weight: 25 gms/pc Price: US$ 1.00/pc

String Tags for Jewellery

Bench Tools

Pre-strung tags easily attach to merchandise

Strip Machine

Rollings Mills

SKU: 1923

•Strips accurately for making tubes from metal or a gold sheet. •These strips can easily be cut in different sizes as per dies. •The blades of these machines are made of alloy steel which helps to enhance durability of the machine. •Two side cutting. •0.15 mm (36 SWG) thickness to 0.50mm (26 SWG) thickness can be cut.

Suede Apron with Four Pockets

Bench Tools

Size: 34” x 24” (length x width); with neck loops and waist tie.

Super Plastic Mallet

Hammers & Mallets

SKU: 1274

Head made from polypropylene plastic that will not splinter or fracture when hammering. To be used on soft metals to avoid marring.

Super Plastic Mallet

Hammers & Mallets

SKU: 1275

Head made from polypropylene plastic that will not splinter or fracturewhen hammering. To be used on soft metals to avoid marring.

Supreme Forming Kit

SKU: 3003

(Size: 12½"x 8"x 4¾") Includes: • 2½" Square Dapping Block • 6½" Forming Block • Stand Anvil • 21 Punch Set (3 to 13, 15, 17, 19, 21, 21, 24, 28, 30, 33, 38, 43mm) • 10 Round Punch Set (2, 3, 5, 7, 9, 11, 15, 18, 21, 24mm) • 6 Square Punch Set (2 to 6, 12mm)

Swage Block with Punch Set (Hardened Punches)

SKU: 1417

Round Punch Size (mm): 24, 21, 18, 15, 11, 10, 7, 5, 3, 2. Square Punch Size (mm): 2x2, 3x3, 4x4, 5x5, 6x6. 45° Diamond Shapes Punch 1 pc; Grooving Block 2½” x 2½” x 2”.

Swiss Style Draw Plate 20 Half-round Holes; # 2/G

Draw Plates

SKU: 1757

•Draw Plates are hardened steel plates with holes of different shapes and sizes through which wire is drawn to make thinner •Plates have holes drilled through it which are slightly wider at the back. Increase length by decreasing diameter